BMW Throttle Cable Bushings - Billet Aluminum - M50 swaps, E36, E39, E38
BMW Throttle Cable Bushings - Billet Aluminum - M50 swaps, E36, E39, E38
BMW Throttle Cable Bushings - Billet Aluminum - M50 swaps, E36, E39, E38
BMW Throttle Cable Bushings - Billet Aluminum - M50 swaps, E36, E39, E38

BMW Throttle Cable Bushings - Billet Aluminum - M50 swaps, E36, E39, E38

K0039

Sale price $35.00 Save 0%
/

Only 56 items in stock!

BMW THROTTLE CABLE BUSHINGS - BILLET ALUMINUM

With age, the factory throttle cable bushing gets soft and spongy, cracking and forcing the throttle cable to sag. Throttle response gets worse since the cable must first straighten up before it starts to move the throttle plate. The EMC (engine management computer ) sets the engine parameters accordingly. Replacing the worn bushings with the Billet Aluminum throttle cable bushings eliminate cable sag and restores the EMC parameters to give a crisp throttle response. Important: Does Not Fit E30/E28 M20 Cars or the 750 or 850. The throttle cable bushings kit includes 2 Billet Aluminum Throttle Cable Bushings, 2 Snap Rings. Instructions can be found here.

WILL THESE THROTTLE CABLE BUSHINGS FIT MY BMW?

These throttle cable bushings are designed to fit the following Years & Models

  • E39 and E38 (1993 to 1998) 528, 530, 540, 740, and 840 without ETK ( Electronic Throttle Controller )M60 and M62 motors
  • E36 and E34 (1990 to 1999) M3, M5, 325, 328, 525, 528, 535, 735
  • M20, M42, M30, S14, S50, S52, M52, or M50 motors
  • E34 M20 cars
  • E28s with M30s only
  • Sorry, does NOT work on the 750, 850 or E30/E28 M20 cars
Instructions

garagistic Aluminum Throttle

Cable Bushing

 

Quick Tip: Its easier to replace the bushings if you remove the throttle body from the intake manifold

 

Step 1: Unhook the throttle cable from the throttle body

Step 2: Unscrew the the throttle cable from the factory bushing and carefully cut the old bushing off the cable

Step 3: Put the throttle cable through the slit on the aluminum bushing.

Step 4: Put the aluminum bushing through the throttle cable bushing bracket and secure it with the snap-ring provided

Step 5: Reinstall the throttle cable back on the throttle body and install it back on the intake manifold.

Step 6: Adjust the tension on the throttle cable to your preferred setting.

 

 

Disclaimer

 

This instructional guide is intended to provide general information only. We recommend a professional automotive technician install any of our products. In no event shall Garagistic be liable for any special, direct, indirect, consequential, incidental injuries or damages whatsoever.