E30 Delrin Solid Steering Flex Coupler
E30 Delrin Solid Steering Flex Coupler
E30 Delrin Solid Steering Flex Coupler
E30 Delrin Solid Steering Flex Coupler
E30 Delrin Solid Steering Flex Coupler
E30 Delrin Solid Steering Flex Coupler

E30 Delrin Solid Steering Flex Coupler

K0137

Regular price $40.00 Save 0%
/

Only 462 items in stock!

E30 BMW SOLID STEERING FLEX COUPLER - 32311153993

Do you want the ultimate in direct steering feel and control? Do you want to feel the road through your steering as you carve the corners? Then the Garagistic E30 BMW Solid Steering Flex Coupler (32311153993) is the part for you! The OEM BMW flex coupler is made from a soft rubber and is designed to help soak up the road limiting the feedback transferred to your steering wheel. While this may be desirable for a soft ride most of us prefer the feeling of the open road as the car performs as it should! Not to mention the OEM units are now some 20+ years old and most are showing their age causing sloppy steering response, limited feedback, and in some cases may even be failing to the point of being unsafe! Fix all these issues all at once by upgrading to the Garagistic E30 BMW Solid Steering Flex Coupler (2311153993).

Our steering flex coupler is made from solid Delrin providing a precision fit and the ultimate in steering response and feedback. By eliminating the flex at the steering coupler you can experience a more direct turn in and better feedback with the road and how your tires are performing in a corner. This is a must have for any track, autocross, or even spirited driving car. Feel the road and replace your worn out steering coupler with the Garagistic E30 BMW Solid Steering Flex Coupler. As with all of our products this item comes with a Garagistic Lifetime warranty! - Includes M10 hardware necessary for installation, some minor opening of the factory bolt holes may be required due to casting differences

FEATURES AND FIT
  • Direct replacement for OEM part number 32311153993 on 1984-1991 E30 325, M3 and Left hand drive 318
  • Made from solid Delrin material
  • Includes hardware for installation Garagistic
  • Lifetime warranty
Instructions

garagistic E30 Delrin/Aluminum

Steering Coupler

 

Step 1: Secure the steering shaft on a vise and cut the factory rivets using a cutting tool.

Step 2: Use a center punch or hammer round chisel to push out the rivets from the steering shaft.

Step 3: Use a size X .397 drill bit to make the holes slightly bigger for the bolts to fit through.

Step 4: Install all four bolts on the coupler so the head of the bolt is flush with the coupler itself.

Step 5: Slide the bolts to one half on the steering shaft and finger tighten the nutswith all four bolts still on the coupler then install the other half and finger tighten the nuts.

Step6: Tighten the nuts down in a cross pattern.

E30 Solid Steering Flex Coupler Install

 

1) Remove the steering shaft from the car
2) Secure the steering shaft on a vise and cut the factory rivets
3) Use a center punch or hammer round chisel to punch out the rivets
4) Use a size X .397 drill bit to bore out the holes for the new bolts
5) Install the new flex coupler using the provided hardware
6) Tighten the nuts down in a cross pattern to ensure a nice even fit