Free standard shipping on orders over $450 on Garagistic Manufactured Products Only - Restrictions may apply
Item is currently being made and will ship in 2 months after order placed.
We've redesigned our E30 and E36 cross brace for even more added structural rigidity and created an integrated jacking point to make this the best underbody bracing for these chassis. Now made in stainless steel for corrosion resistance and increased strength.
Tighten up your E30/36 chassis with our completely revamped cross brace! This unit will drastically increase the rigidity and reduce flex by connecting the sub-frame to the frame rails. This is an absolute must-have for E30 Cabrio convertible owners to get rid of the creaks. These cross braces are a direct bolt-up that will not conflict with aftermarket sway bars or even extremely lowered E30's.
NOTE - 2 buttonhead bolts will be included with E36 X-Braces and are to be installed on "1B" as shown in the photo below.
100% compatible with our M60 and M3 swap components.
Includes new hardware!
This is 100% bolt up and is fully reversible. No drilling or permanent modification is needed to properly install. Be forewarned this x-brace does sit slightly lower than the subframe on the E30 chassis, but it sure as heck can take an absolute beating. Don't be too worried if it scrapes occasionally.
Please make sure that your exhaust hangers and motor mounts are in good shape. Old motor mounts tend to lower the motor which could lead to the exhaust touching the cross brace. Healthy motor mounts are a must with this x brace.