Complete Bundle Rear Subframe Camber/Toe Correction Kit with Hardware (E30, E28, E34, Z3, E21)-Garagistic-Garagistic
Complete Bundle Rear Subframe Camber/Toe Correction Kit with Hardware (E30, E28, E34, Z3, E21)
Complete Bundle Rear Subframe Camber/Toe Correction Kit with Hardware (E30, E28, E34, Z3, E21)-Garagistic-Garagistic
Complete Bundle Rear Subframe Camber/Toe Correction Kit with Hardware (E30, E28, E34, Z3, E21)

Complete Bundle Rear Subframe Camber/Toe Correction Kit with Hardware (E30, E28, E34, Z3, E21)

K0006-EH

Regular price $150.50 Save 0%
/


Only -72 items in stock!

Complete Bundle Rear Subframe Camber/Toe Correction Kit with Hardware

The stock E30, E21, E28, E32, and E34 rear subframes do not allow you to align the rear wheels. Alignment is a critical point in spec E30 as well as any track, autocross, or spiritedly driven car. Adjusting your camber and toe is also a must when lowering your car. It's a night and day difference. When an E30, for example, is lowered, the car has a lot of negative camber (up to 6 degrees!). Although this is wanted by some, it can be excessive. These brackets are welded to the rear subframe on the rear control arm mounting points. You slot the original hole and have these professionally welded in place. Then using either the Garagistic eccentrics or the OEM eccentric BMW hardware the rear of your BMW can be properly aligned! We also offer subframes with this welding service completed and freshly powder coated for most BMW chassis, please see our other listings.

Compatibility

Can be used for BMW E21, E28, E30, E32, E34, E36 318ti, and Z3. These are spec E30 legal!

Professional installation recommended.

WELDING REQUIRED!

WHAT'S INCLUDED AND WHICH KIT DO I NEED?

Each "kit" includes 8 brackets with hardware. This is enough to do BOTH camber AND toe adjustment (This includes 8 weld on brackets and 4 bolt assemblies with eccentrics, you will require eccentric hardware for proper adjustment). The subframe has 4 mounting points for the rear trailing arm, 2 per side. The camber is adjusted using the inner mounts (closest to diff), and toe is adjusted with the outer mounts (closest to the wheels). The camber brackets (inner tabs) should be welded with the slots going up and down. The toe bracket (outer tabs) slots should be horizontal (front to back).

HARDWARE INFO

Please be sure to check if you want the genuine BMW OEM Hardware( Includes Eccentric Bolts, Eccentric Washers and Bolts) or if you would like the Garagistic eccentrics shown below. If you get your own OEM Hardware the BMW part numbers:

33321095102 - Eccentric Bolt

33306786186 - Eccentric Flat Washer

33326760668 - Self-Locking Collar Nut

General Shipping Information:

If the shipping address you input is different from your confirmed Paypal mailing address you must email us at info@garagistic.com to let us know that. We ship to your confirmed Paypal mailing address to protect ourselves. We must have an email telling us the shipping address if you do not want it shipped to your confirmed Paypal address. All tracking numbers sent via Paypal. If you have any questions please feel free to contact us at info@garagistic.com


Here at Garagistic, we have over 500 products with more than 700 total variations of those products which are produced in-house here in sunny CA. We pride ourselves in creating products from scratch out of about 75 different types of raw materials ranging from aluminum to Delrin plastic. While we do have stock of raw material, our products take time to for us produce, assemble and pack.



Free Shipping Limitations:

Free shipping is only eligible in the contiguous USA. Free shipping only applies to order that meet certain requirements set by us (and can be changed at anytime). Those requirements are currently that an order is over $300 and under the a "Dimensional package weight" of 30lbs. What this means is that roll bars, sway bars, and items we deem oversized do not ship for free. If your order is over this 30lbs rule it will not qualify for free shipping. Free shipping methods are at our discretion and CANNOT BE CHANGED. Most items will either be first class or priority USPS. Free shipping is not valid internationally and this list (but not limited to): Alaska, American Samoa, Micronesia, Guam, Hawaii, Marshall Islands, Northern, Mariana Islands, Puerto Rico, U.S. Virgin Islands. Customers will not be able to pick shipping methods (or overnight) if free shipping is selected. Qualifying order total is based on product subtotal—taxes and non-standard shipping charges are not included as a qualifying cost. You are responsible for non-standard shipping charges such as special handling surcharges and oversize fees (where indicated), Truck Freight fees, expedited shipping, hazardous materials charges, etc. Offer is subject to adjustment due to returns, cancellations, and exchanges. We have the right at anytime to revoke free shipping.




International Buyers:

Please be aware that we offer two shipping methods overseas. First class and priority flat rate envelope. Although first class is much cheaper, USPS seems to lag on delivery and there is no way to track the package once it has been dropped off.

There is a 20% restocking fee for all returns. For custom parts (made to order parts like our engine mounting kits) there is a 35% restocking fee. We do not accept returned customized items such as driveshafts and wiring harnesses.

The flat rate envelope is more money but you will get your gears much much quicker and the tracking number shows the package route! (the default shipping method on this site is this option).

If you want the cheaper route, you must email us telling us this and we will send you a Paypal invoice. We are not liable if you do not get your package with this option as we have no way to track it once it's at the post office.

You have the option to locally pickup items at our Westminster location (by appointment only):



Pickup Address:

Garagistic LLC

6372 Industry way

Westminster, CA, 92683

Email: info@garagistic.com



Refund Information:

We do not refund shipping costs. On returns on custom parts (or parts returned past 30 days from purchase) we have the right to give store credit instead of a refund. We do not accept returned customized items such as driveshafts and wiring harnesses. By using this website you agree to all these terms.

Please be aware that some parts we offer are made to order and can take up to two weeks before they are shipped. Please contact us before ordering if this is an issue.