{"product_id":"e9x-e8x-billet-uprights-knuckles-with-geometry-correction","title":"E9X \/ E8X Billet Uprights \/ Knuckles with Geometry Correction","description":"\u003ch1\u003eE9X \/ E8X Billet Uprights \/ Knuckles with Geometry Correction\u003c\/h1\u003e\n\u003cp\u003eReduced pricing a limited time! \u003c\/p\u003e\n\u003cp\u003eCorrects the many issues of an E9X\/E8X with lowered ride heights. This is the ultimate suspension bolt-on for lowered E9X and E8X cars with no downside. Replaces the original front upright\/knuckle and bolts in perfectly to the stock strut, thrust arm, lower control arm, tie rod, wheel bearing and brakes.  Offsets lower control arm, thrust arm and tie rod down by 30mm and puts them back or close to factory geometry. The grippier your tires the more effective these uprights are. \u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eBenefits\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eAssumes same lowered ride height of car with and without billet uprights:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased front end grip  and car takes a \"set\" more quickly due to corrected roll center. The car literally rolls less with the same amount of lateral force.\u003c\/li\u003e\n\u003cli\u003eEliminates bump steer and resets anti-dive angle due to corrected thrust arm position for more compliance over bumps when braking. Standard offset spacers for stock arms do not do this. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAllows less camber to be run for better braking performance and easier setup window of front end alignment\u003c\/li\u003e\n\u003cli\u003eSignificantly Improved tire wear as the tire is staying consistently flatter and not running on the inside edge under braking and the outside edge under full turning. If you have one of these cars you know what we are talking about!\u003c\/li\u003e\n\u003cli\u003eEven works on aggressively lowered street cars - improved compliance over bumps and smoother ride.\u003c\/li\u003e\n\u003cli\u003eCNC Manufactured from Billet 6061-T6 Aluminum for incredible strength\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe short version: Increases grip, improves response, reduces tire wear and even improves ride and braking compliance in significantly lowered cars! \u003c\/p\u003e\n\u003cp\u003eThese are also much safer than arms with offset spacers as you are putting an incredible load through the bolt in that scenario and these also allow for more geometry correction than could be possible with just spacers. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOther Installation Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWe recommend running factory control arms with these with a thrust arm bearing such as SPL, Bimmerworld, Turner etc. \u003c\/li\u003e\n\u003cli\u003eUses factory E9X M3 wheel bearing and ABS sensor. We recommend Core4 bearings with press in studs. \u003c\/li\u003e\n\u003cli\u003eUnlikely to fit with a 17\" wheel although it does depend on the wheel. The tie rod spacing to the wheel is marginal.\u003c\/li\u003e\n\u003cli\u003eDo not buy these if your car is not lowered by at least 25mm as you will get the wrong kind of correction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Strom Motorsports","offers":[{"title":"Default Title","offer_id":44174901739619,"sku":"99.00168","price":2950.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/8868\/7971\/files\/99_00168E9X-E8X-Billet-Uprights-Knuckles-with-Geometry-Correction-Suspension-Garagistic-bmw-e30-e36-e46-e92-grip-race-drift.webp?v=1778918725","url":"https:\/\/www.garagistic.com\/products\/e9x-e8x-billet-uprights-knuckles-with-geometry-correction","provider":"Garagistic","version":"1.0","type":"link"}