KM Euro E28 (528, 535, M5) Odometer Gear Repair Set
KM Euro E28 (528, 535, M5) Odometer Gear Repair Set is backordered and will ship as soon as it is back in stock.
Subscribe to our newsletter
Get the latest updates on all our new collections, sales, offers and product arrival dates.
PREORDER
Please note that your order will ship when this item is back in stock.
KM EURO E28 (528, 535, M5) ODOMETER GEAR REPAIR SET
Please note!
This is E28 odometer repair gear set is for KM, VDO Euro spec cluster odometers only! Like most odometers in classic BMWs, your E28s odometer probably long stopped counting miles driven and trip odometers do not work. We have a solution to fix this problem without breaking the bank, with some basic tools, some time, and our gears; it is an easy fix! These are the 12 gear,12/48 gear, and 17/48 gear. If your third gear count is different please let us know! E28: EURO KM spec. 1982 to 1988 528, 535. M5 (includes E, ES and S models).
Every Set Includes
The three gears that needs replacement are included. We no longer include two spacers since our newest design includes a stand off (post) that keeps the gears spaced correctly and moving smoothly (just like the original OEM gear design). The factory gears become soft over time (imagine how a stale Oreo cookie would feel when broke in half; that is what the gears in your current broken gauge feels like). These gears are quality made with better then OEM material with a quality fit and finish. These gears will outlive your car! When purchasing our kit be sure to check out our INSTALLATION GUIDE.
PLEASE NOTE: YOUR KIT'S GEAR COLOR MAY BE DIFFERENT FROM PICTURED
E28 ODOMETER GEAR REPAIR INSTRUCTIONS
This guide is only a suggested way to fix your equipment. They do not intend to be the only way to fix your equipment. It is your responsibility if any damage occurs. If you are not sure of any part of our instructions, feel free to send us an email and we will be happy to help.
There are many small pieces involved with this, so proceed with caution, use common sense and proper safety measures.
Please be aware that we are not responsible for any damages that happen to your cluster. By using this guide, you understand that we made this guide to make installation easier for you. However, do to the age of these parts, every gauge cluster has been through a different life.
TOOLS NEEDED:
- Assortment of philips screw drivers
- needle nose pliers
- flat screw driver
- a little patience
TIME NEEDED:
- About 45mins. This is something that takes patience. You're dealing with lots of tiny pieces.
STEP 1
Remove the Philips screws in the back of your cluster. When placed down, be careful not to brake the tabs!
STEP 2
When removing rear panel, take note of the two lower tabs and be sure to pull straight up or damage to connectors inside may happen.
STEP 3
Remove the 4 Philips screws that hold the odometer in place. Before you try to take out the cluster, do not forget the connector on the right side of the cluster. There are tabs that hold it in place. Once this is out you can pull straight out because there are connectors holding. DO NOT BEND! We found its best if you hold the cluster as it was placed in the car that way it doesn't fall out.
STEP 4
When odometer is out, you will see the gears on the side. There should be three. See the damage.
.JPG "e28 odometer gears")
STEP 5
There are two screws holding a clear cover over the gears. Remove them.
.JPG "e28 odometer gears")
STEP 6
The gears can then be replaced in the order they are taken out. They fit in an interlocking stacking setup. Notice that the gears are very soft and will fall apart as you try to remove them. NOTE: There is a brass bushing on the smaller 12 teeth gear. It is on the shaft and needs to be removed to install the new gear. You do not need this bushing with the new gear. DO NOT TRY TO PULL THE BUSHING OFF WITH ANY TOOLS AS THIS WILL DAMAGE THE MOTOR.
(the way the brass bushing looks removed).
.JPG "e28 odometer gears")
.JPG "e28 odometer gears")
STEP 7
Put together in reverse order. Be sure you have gotten all the old pieces of the gears out so you have no future problems. Before closing everything, be sure to run the gears by hand to make sure everything is right and working correctly.
Do not forget to install out spacer to keep the gears space correctly. DO NOT PUSH IT ALL THE WAY DOWN AGAINST THE GEAR. THIS WILL CAUSE THE GEARS TO PINCH AND IT WILL NOT BE ABLE TO MOVE!
ENJOY! No more guessing when the next oil change is!
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
