Garagistic Solid Shifter Rod - Short/ Medium/ Tall (E30, E36, E46)
K0663Regular price Sale price $30.00 Save 0%
Need another rod for your Garagistic solid shifter? Want an extra one for daily driving and then another one for the track? Pick up an additional rod here! Available in select bare and anodized finishes.
These rods are for our solid shifter assemblies only. These should only be bought for use with them as they will not work in any other application and will not bolt up to the cars oem shifter.
Rod sizes: Small (4in), OEM (4.5in non-threaded), Medium (6in), and Tall (8in)
DSSR Hardware Kit
K0422Regular price $11.00 Save 0%
This is the hardware kit needed to install any Garagistic DSSR into your BMW!
All of our DSSR's come with this set included but if you need another set or replacement, this is where you can get it.
- x2 Pins
- x2 Circlips
- x4 Delrin Washers
Garagistic Solid Shifter Rod - OEM Slotted (E30, E36, E46)
K0664Regular price Sale price $100.00 Save 0%
These rods are for our solid shifter assemblies only. These should only be bought for use with them as they will not work in any other application and will not bolt up to car. This is ideal if you have our solid shifter on your dual-purpose car. This OEM rod can use stock shift knobs and fit under stock boot. This shifter rod is the same height as the ever so popular Z3 shifter upgrade. The OEM slotted shifter rod features the same slot design that BMW uses so you can install any BMW shift knob onto our shifter.
Pick up an additional rod here! Available in select bare and anodized finishes.
Garagistic BMW Threaded Shift Knob Adapter
C0336Regular price $15.00 Save 0%
If you have a Garagistic shift knob and you want to install it on a factory BMW shifter, you'll need one of these adapters to install. This adapter is included in all shift knobs purchased from us. If yours is broken or lost, you can get a replacement here.
The threaded adapter allows you to run a Garagistic threaded shift knob onto an OEM style shifter handle which clicks in place with a slot.
Installation of the adapter is as simple as lining up the slot on your shifter with the inside of the shifter adapter then pressing it on. It will require a bit of force but the adapter will click in place once fully seated.
Removal of the threaded adapter requires that you turn the Garagistic shift knob several times to expose about 4 or 5 threads of the adapter.
Once the Garagistic shift knob has been threaded off this much, the shift knob (with the threaded adapter) will pull right off.
It is very important the threaded shift knob is threaded off a little before pulling off of the rod. The last few threads are what tighten the shift knob + adapter down on the rod.
E46 Front Control Arm Bushing Hex Inserts
K0573Regular price $11.00 Save 0%
The E46 front control arms, from the factory, came with 2 different size hex ends which go into the front control arm bushing. If you selected the wrong size hex insert when purchasing a Garagistic E46 Front Control Arm Bushing, you can purchase another set of the other size through here.
- x2 Hex Inserts