BMW E30 Rear Subframe Bushing Installation Guide - K0018-K0019

E30 Rear Subframe Bushing Installation Guide

With the old bushings removed, thoroughly clean the inside of the housings to prepare for the new Garagistic subframe bushings.

Standard Subframe Bushings:
The bushings with the THICK lip will be on the TOP. The bushings with the THIN shoulder will be on the BOTTOM.

Raised Subframe Bushings:
The bushings with the THICK lip will be on the BOTTOM. The bushings with the THIN lip will be on TOP.

The two provided races are recessed on one end. This recessed end will be installed facing up to allow the top OEM washer to fit on top of the bushing.

*Instructions are intended to provide general information only. We recommend a professional automotive technician install any of our products.