E36 X-Brace Installation
Step 1: Remove the bolts for the front lower control arm bushings
Step 2: Remove the rack and pinion bolts
Step 3: Position the x-brace in place and start 2 bolts, one on each control arm bushing with the new hardware provided and then the factory rack and pinion bolts
Step 4: Install the remaining hardware. Push the x-brace against the vehicle so it sits flush and tighten the 4 lower control arm bushings
Step 5: Lastly tighten the rack and pinion bolts
Disclaimer
This instructional guide is intended to provide general information only. We recommend a professional automotive technician install any of our products. In no event shall Garagistic be liable for any special, direct, indirect, consequential, incidental injuries or damages whatsoever.