E28/E24/E34 44mm Rear Trailing Arm Bushings-Poly-80A soft poly (autox/street)-Garagistic
E28/E24/E34 44mm Rear Trailing Arm Bushings-Poly-Delrin (race only)-Garagistic
E28/E24/E34 44mm Rear Trailing Arm Bushings-Poly-Delrin (race only)-Garagistic
E28/E24/E34 44mm Rear Trailing Arm Bushings-Poly-Delrin (race only)-Garagistic
E28/E24/E34 44mm Rear Trailing Arm Bushings-Poly-Delrin (race only)-Garagistic
E28/E24/E34 44mm Rear Trailing Arm Bushings-Poly-Delrin (race only)-Garagistic
E28/E24/E34 44mm Rear Trailing Arm Bushings-Poly-Delrin (race only)-Garagistic
E28/E24/E34 44mm Rear Trailing Arm Bushings-Poly-80A soft poly (autox/street)-Garagistic
E28/E24/E34 44mm Rear Trailing Arm Bushings-Poly-Delrin (race only)-Garagistic
E28/E24/E34 44mm Rear Trailing Arm Bushings-Poly-Delrin (race only)-Garagistic
E28/E24/E34 44mm Rear Trailing Arm Bushings-Poly-Delrin (race only)-Garagistic
E28/E24/E34 44mm Rear Trailing Arm Bushings-Poly-Delrin (race only)-Garagistic
E28/E24/E34 44mm Rear Trailing Arm Bushings-Poly-Delrin (race only)-Garagistic
E28/E24/E34 44mm Rear Trailing Arm Bushings-Poly-Delrin (race only)-Garagistic

E28/E24/E34 44mm Rear Trailing Arm Bushings

K0123-80

Regular price $154.00 Save 0%
/


Only 1 items in stock!

BMW E28/E24/E34 44MM REAR TRAILING ARM BUSHINGS

Introducing our large diameter (44mm) Garagistic trailing arm bushings for E28, E24, and E34 chassis is polyurethane and delrin. The factory rubber bushings are made with rubber and designed to provide comfort. This means that they deflect in multiple directions under use making the rear end feel unpredictable or numb to the driver. This is not good if you want to feel tuned in to your car and the road! We now offer these upgraded bushings in 80A, 95A, and solid delrin to help tighten up your rear end for the ultimate in driver feel. These bushings are recommended for the performance BMW enthusiast with increasing levels of stiffness depending on the desired use. Eliminate the slop in your rear end with a set of Garagistic trailing arm bushings!

NOTE ON THE DIFFERENCES OF POLY AND DELRIN IN THIS APPLICATION

We offer the BMW E28/E24/E34 44mm Rear Trailing Arm Bushings in 2 different materials: 80A poly, and solid delrin. Each material has its intended application and benefits. The 80A poly is the happy medium between upgraded bushings and plush OEM rubber. It is intended for the spirited street driver, and occasional Auto-X and track use. It offers a definite increase in performance with a limited increase in noise transfer and harshness. If you have a car with a louder exhaust and or a car intended for only weekend use in the canyons or on Auto-X and track circuit this is the bushing for you. Finally the solid delrin bushings are for the ultimate in performance. This stiff solid bushing offers almost no deflection, keeping the rear end as tight as you can get it! It is designed for the truly hardcore racers and track enthusiasts. Another note, the trailing arms go through a ton of articulation and movement during use, in light of this it is a common area for bushing squeak even with factory bushings, it is always recommended to keep these well greased!

THESE BUSHINGS REQUIRE THE REMOVAL OF THE PITMAN ARM (ONLY SOME MODELS CAME EQUIPPED WITH THIS) FOR PROPER USE.

Which model BMW will these rear trailing arm bushings fit?

E28

  • M5
  • M535i
  • 535/i (09/82+)
  • 528i
  • 528e (09/82+)
  • 525i (04/86+)
  • 525e (04/86+)
  • 520i (04/86+)
  • 524td (04/86+)

E24

  • 628csi (05/82+)
  • 633csi (09/82+)
  • 635csi (09/82+)
  • M6 (09/82+)
  • M635csi (05/82+)

E34

  • ALL MODELS

 

QUICK NOTE ABOUT USING OLD TRAILING ARM BOLTS OR ALUMINUM RACES

Please keep in mind when shopping around for trailing arm bushings that a lot of competitors use aluminum for the race instead of steel. This is not a good idea. It's not a good idea because nothing that rotates should be aluminum as it will wear due to the soft and malleable nature of aluminum compared to steel. Your BMW OEM race was steel and so is ours.

Another note-worthy concern when purchasing bushings is in regards to hardware and tolerances; we make our products compatible with our parts as well as our competitors. We designed our parts for cross-compatibility to make things a bit easier for you when shopping for you E30. Our BMW poly trailing arm bushings are a prime example of this, they are not only be compatible with our camber and toe kit but others as well. The bolt diameter on the eccentric hardware (OEM BMW) for those who make their rear subframe adjustable using our camber and toe kit (while they have the subframe out) is bigger then the old OEM E30 hardware (which could possibly be worn as well). So for this reason, we recommend that you replace your old, worn, tired and small stock hardware for bigger (and tighter fitting) hardware which you can find in the options list above. This is optional. However it's a great way to get an even more precise feel in the trailing arms you cant get from other kits out there. Do it once, do it right. Kit includes 10.9 grade bolts, washers and even nylon locking nuts. Everything for the install.

General Shipping Information:

If the shipping address you input is different from your confirmed Paypal mailing address you must email us at info@garagistic.com to let us know that. We ship to your confirmed Paypal mailing address to protect ourselves. We must have an email telling us the shipping address if you do not want it shipped to your confirmed Paypal address. All tracking numbers sent via Paypal. If you have any questions please feel free to contact us at info@garagistic.com


Here at Garagistic, we have over 500 products with more than 700 total variations of those products which are produced in-house here in sunny CA. We pride ourselves in creating products from scratch out of about 75 different types of raw materials ranging from aluminum to Delrin plastic. While we do have stock of raw material, our products take time to for us produce, assemble and pack.



Free Shipping Limitations:

Free shipping is only eligible in the contiguous USA. Free shipping only applies to order that meet certain requirements set by us (and can be changed at anytime). Those requirements are currently that an order is over $450 and under the a "Dimensional package weight" of 30lbs. What this means is that roll bars, sway bars, and items we deem oversized do not ship for free. If your order is over this 30lbs rule it will not qualify for free shipping. Free shipping methods are at our discretion and CANNOT BE CHANGED. Most items will either be first class or priority USPS. Free shipping is not valid internationally and this list (but not limited to): Alaska, American Samoa, Micronesia, Guam, Hawaii, Marshall Islands, Northern, Mariana Islands, Puerto Rico, U.S. Virgin Islands. Customers will not be able to pick shipping methods (or overnight) if free shipping is selected. Qualifying order total is based on product subtotal—taxes and non-standard shipping charges are not included as a qualifying cost. You are responsible for non-standard shipping charges such as special handling surcharges and oversize fees (where indicated), Truck Freight fees, expedited shipping, hazardous materials charges, etc. Offer is subject to adjustment due to returns, cancellations, and exchanges. We have the right at anytime to revoke free shipping.




International Buyers:

Please be aware that we offer two shipping methods overseas. First class and priority flat rate envelope. Although first class is much cheaper, USPS seems to lag on delivery and there is no way to track the package once it has been dropped off.

There is a 20% restocking fee for all returns. For custom parts (made to order parts like our engine mounting kits) there is a 35% restocking fee. We do not accept returned customized items such as driveshafts and wiring harnesses.

The flat rate envelope is more money but you will get your gears much much quicker and the tracking number shows the package route! (the default shipping method on this site is this option).

If you want the cheaper route, you must email us telling us this and we will send you a Paypal invoice. We are not liable if you do not get your package with this option as we have no way to track it once it's at the post office.

You have the option to locally pickup items at our Westminster location (by appointment only):



Pickup Address:

Garagistic LLC

6372 Industry way

Westminster, CA, 92683

Email: info@garagistic.com



Refund Information:

We do not refund shipping costs. On returns on custom parts (or parts returned past 30 days from purchase) we have the right to give store credit instead of a refund. We do not accept returned customized items such as driveshafts and wiring harnesses. By using this website you agree to all these terms.

Please be aware that some parts we offer are made to order and can take up to two weeks before they are shipped. Please contact us before ordering if this is an issue.

If that tickled your fancy.....these might too.