Garagistic BMW Wheel Spacers - 5x120 - 72.56 CB - 5mm
is backordered and will ship as soon as it is back in stock.
SKU:K2000-5
Local Pickup Available
As soon as your order is ready, we will let you know! We are open weekdays 9AM-5PM.
Free Shipping*
Free standard shipping on orders over $300 *Restrictions apply
30 Day Returns*
30-day money back guarantee on new and uninstalled products. Restrictions apply, full details below.
Returns and Exchanges made easy!
Garagistic is committed to 100% customer satisfaction! If you are unsatisfied with your purchase, you may return your purchase within 30 days of the delivery date STILL IN ITS ORIGINAL PACKAGING. WE DO NOT ACCEPT RETURNS ON ANY USED OR INSTALLED PARTS. Some items will be subject to a 20% restocking fee, as well as any order returned after 30 days. We do not accept returns on clearance items. All clearance items are final sale and the buyer is responsible for confirming fitment of any application outside of stock configuration. We do not accept returned customized or made-to-order items such as chassis mount shifters, supreme OEM shifters, driveshafts, wiring harnesses, engine mounting kits, roll bars etc (please contact us if you are unsure if you part falls under this category). All products we carry from other vendors such as NRG Innovations and LINK ECU are ineligible for return. We do not refund shipping costs. We reserve the right to refuse a return on any orders after 30 days. On returns authorized past 30 days from the delivery date, we reserve the right to give store credit instead of a refund (please reach out to confirm). We absolutely do not accept used or damaged items for return. It is your responsibility to make sure that returned items arrive to us in good condition please pack your items accordingly. We reserve the right to refuse a return on any items not authorized before hand. It is the customers responsibility to arrange return shipping for any items that are rejected through the return process.
We try and make the return process as easy as possible for you, here's how!
Instant Garagistic Credit - we give you store credit BEFORE you ship the item to be able to reorder before we even get your returned product!
See estimated refund right away! - Complete transparency for the whole process!
Print label to send back directly from Return/Exchange Center!
Our automated system will help with all your return and exchange requests. Our self-service returns center will pull your order information with your email or order number. Begin below at this link:
Because we are very small company with a limited amount of humans, the only way to return or exchange an item is through this system. Its VERY easy to use and will walk you through everything. You may call us if you need help with the system, however, we suggest you try before calling. When you call or email, we are dedicated to giving you as much help as you need. We don't mind the calls, we don't mind the e-mails, but please, please, please be aware that every phone call or email takes valuable time away from actually building and shipping the orders. There are only 8 guys working here and the fewer detailed updates we give, the faster we can ship orders, release more epic parts, and help with technical issues. Any extra love and patience you give us is an investment we'll put right into getting your parts and service needs.
Full Terms and Conditions that were agreed to on checkout:
Well the first reason is that it was in the terms and conditions on checkout. However there is a better reason. Honest companies charge restocking fees for a very simple reason: to keep costs (and thus prices for you) down when dealing with the return of items that are not defective. There are a lot of costs associated with processing an order. If you buy something and then return it, there is more costs to handle the return.
All returns must be thoroughly inspected when received back at the warehouse to ensure they are in 100% resalable condition. New packaging materials usually need to be utilized because it is typically only designed to be used two times (initial use and possible return shipment). Time and materials involved inspecting, repackaging and restocking are not insignificant. The bottom line is restocking fees help keep prices low for you!
For this reason we do not accept returns on any used or previously installed products. We will not sell used products to our customers who are expecting brand new Garagistic parts. At times we may have to charge a higher restocking fee on a return if the parts are damaged during the return shipping. It is your responsibility to ensure the safe arrival of the parts you are returning to us. Thanks!
Share:
Garagistic BMW Wheel Spacers - 5x120 72.56 - CB
Overview
We are proud to introduce our new BMW Wheel Spacers! Sold as a pair (2 spacers) and offered in a variety of sizes ranging from 10mm to 25mm, our billet wheel spacers are sure to help you achieve that perfect fitment you've been looking for. Machined from billet aluminum and anodized flat black, these spacers are exceptionally lightweight, while also being long-lasting and strong enough to withstand the abuse seen at the track or in the canyons.
Our spacers are tailored for BMW enthusiasts who demand both style and function. The 5x120 bolt pattern and 72.56mm hub bore guarantee great fitment on both your hubs and wheels without needing to run hub-centric rings! Our design features integrated relief cuts that are strategically located along the outside of the spacer making removal easy if needed. We also anodize our spacers in a flat black to prevent rusting and ensure that the spacers don't get stuck to the wheel hub as they are so notorious for doing.
If you are looking for a way to improve your car's wheel fitment or run bigger brake calipers, while also avoiding many of the common issues with running spacers, look no further than our new Garagistic BMW Wheel Spacers!
IMPORTANT
Wheel stud conversion is REQUIRED when using wheel spacers. OEM wheel bolts are not long enough to accommodate the added width of the spacers! Read below for the recommended wheel stud length based on spacer thickness. Click here to check out our Garagistic 5-Lug Wheel Stud Kit
10mm-12mm Spacers = 68mm Wheel Studs
15mm-25mm Spacers = 90mm Wheel Studs
Note:Make sure to tighten lug nuts to OEM specifications immediately after installation and again after driving a short distance (e.g., 50-100 miles) to ensure proper torque and prevent loosening due to initial settling.
Features
Each kit includes 2 spacers
Bolt Pattern: 5x120
Wheel/Hub Center Bore: 72.56mm
Design: Fully Pocketed to Decrease Weight
Material: Billet Aluminum
Finish: Anodized Flat Black
Install/Removal: Integrated Relief Cuts for Easy Removal
Fitment
Fits: Any vehicle with 5x120 bolt pattern and 72.56mm center bore
E30 with 5-Lug Conversion
E36 3-Series Models
E46 3-Series Models
E8X 1-Series Models
E8X Z4 Models
E9X 3-Series Models
Many More BMW Models
Each kit includes 2 spacers
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
At Garagistic, we don’t just make parts—we bring history back to life. The BMW E30/E36 Gr.A DTM Gas Pedal is one of those rare pieces that blends OEM motorsport heritage...
The Comprehensive E30 5-Lug Swap Guide Overview This is a detailed parts and information guide on converting an e30 to a 5-lug setup. Read the whole guide before attempting this project....
The annual Garagistic Meet 2025 recap video! This meet has grown a lot in the last few years and we're very grateful for all those who support us and the...
Attention racers! Garagistic is back with another deep-dive lap guide—this time for the legendary Chuckwalla Valley Raceway. Whether you’re a first-timer or a returning driver looking to shave off a...
WHEN: Sunday, March 23rd, 2024TIME: 9:00 AMWHERE: Garagistic - 6372 Industry Way, Westminster, CA 92683 Join us for a day of cars, community, and good vibes! RSVP HERE! Come check...
E36 Chassis Reinforcement Kit Photo Guide & Installation Overview Install Notes IMPORTANT: Professional Installation is recommended! Fitment: All of these reinforcements require welding and may require minor modifications (bending/grinding) to...
Attention racers! Garagistic has put together an in-depth lap guide to help you master Buttonwillow's brand-new track, The Circuit. After countless hours of sim practice, we developed an optimized approach and...
Garagistic and Partners will put an offer on Willow Springs Raceway. Ever since the announcement of the availability of "The Fastest Road in the West," we have been gathering data...
We are proud to introduce our new BMW Wheel Spacers! Sold as a pair (2 spacers) and offered in a variety of sizes ranging from 10mm to 25mm, our billet wheel spacers are sure to help you achieve that perfect fitment you've been looking for. Machined from billet aluminum and anodized flat black, these spacers are exceptionally lightweight, while also being long-lasting and strong enough to withstand the abuse seen at the track or in the canyons.
Our spacers are tailored for BMW enthusiasts who demand both style and function. The 5x120 bolt pattern and 72.56mm hub bore guarantee great fitment on both your hubs and wheels without needing to run hub-centric rings! Our design features integrated relief cuts that are strategically located along the outside of the spacer making removal easy if needed. We also anodize our spacers in a flat black to prevent rusting and ensure that the spacers don't get stuck to the wheel hub as they are so notorious for doing.
If you are looking for a way to improve your car's wheel fitment or run bigger brake calipers, while also avoiding many of the common issues with running spacers, look no further than our new Garagistic BMW Wheel Spacers!
IMPORTANT
Wheel stud conversion is REQUIRED when using wheel spacers. OEM wheel bolts are not long enough to accommodate the added width of the spacers! Read below for the recommended wheel stud length based on spacer thickness. Click here to check out our Garagistic 5-Lug Wheel Stud Kit
10mm-12mm Spacers = 68mm Wheel Studs
15mm-25mm Spacers = 90mm Wheel Studs
Note:Make sure to tighten lug nuts to OEM specifications immediately after installation and again after driving a short distance (e.g., 50-100 miles) to ensure proper torque and prevent loosening due to initial settling.
Features
Each kit includes 2 spacers
Bolt Pattern: 5x120
Wheel/Hub Center Bore: 72.56mm
Design: Fully Pocketed to Decrease Weight
Material: Billet Aluminum
Finish: Anodized Flat Black
Install/Removal: Integrated Relief Cuts for Easy Removal
Fitment
Fits: Any vehicle with 5x120 bolt pattern and 72.56mm center bore