Treehouse Style Control Arm Mount Installation - K0082-K0429-K0430
Treehouse Style Control Arm Mount Installation
After removal of old front control arm bushings, be sure to properly clean and sand down the ends of the control arms. Any rough edges can shave a layer of the delrin insert in the new control arm mounts and cause loose fitment.
Using the supplied lithium grease, lubricate the ends of the control arms and the inside of the delrin sleeves of your new Garagistic treehouse mounts.
Start installation by twisting the treehouse mounts on to the control arms. You may need to use a rubber mallet to get the mounts on the control arms the rest of the way.