Z3 DSSR Selector Rod Z3M, 2.8, & 3.0  - 25111222780
Z3 DSSR Selector Rod Z3M, 2.8, & 3.0  - 25111222780
Z3 DSSR Selector Rod Z3M, 2.8, & 3.0  - 25111222780
Z3 DSSR Selector Rod Z3M, 2.8, & 3.0  - 25111222780
Z3 DSSR Selector Rod Z3M, 2.8, & 3.0  - 25111222780
Z3 DSSR Selector Rod Z3M, 2.8, & 3.0  - 25111222780

Z3 DSSR Selector Rod Z3M, 2.8, & 3.0 - 25111222780

K0051

Regular price $105.00 Sale price $85.00 Save $20.00
/

Only 498 items in stock!

Z3 M, 2.8, & 3.0 DSSR SELECTOR ROD

Eliminate slop in your Z3 M, 2.8, or 3.0 shifter assembly with the Garagistic DSSR selector rod! Replace the factory single shear rod that is prone to play and slop with this DSSR (Double Shear Selector Rod). By reducing play in the shifter assembly the shifter will feel more crisp, gears will be easier to find, and shifting will be more direct. Our stainless DSSR is designed to be a direct replacement to BMW factory part number 25111222780.

These DSSR selector rods are solid TIG welded stainless steel construction, made right here in our shop in CA, USA! The solid tube design adds weight to the shifting assembly where it counts, helping to make shift inputs effortless in any gear.

Please note: Confirmed compatibility with oem style shifter only (some shifters will need to be slightly filed down to fit).  May also work with some after market shifters.

DSSR FEATURES AND COMPONENTS
  • Solid stainless construction and finish
  • TIG welded 
  • Comes with all pins and hardware to install
  • Direct replacement for OEM part number 25111222780
  • Made with pride in the USA
Instructions:

garagistic DSSR

Installation Instructions

 

Step 1: With a flat head screwdriver remove the locking clip by pushing on the inside lip of the clip to slide it off the selector rod on the shifter side on selector joint side.

Step 2: Wiggle and pull the selector rod until its free on both ends. Pay attention to the bends of the selector rod and how it came off as it will be your guide on how to install the DSSR in the proper direction.

Step 3: Grab your garagistic DSSR and starting with the selector joint side first line up the holes on the DSSR with the selector joint. It should be a tight fit but if its too tight open the tabs a bit till you achieve proper fitment. Once aligned slide the provided pins in with a washer on each side followed by the c-clip to lock it in. Repeat on the shifter side.

 

Notice: If you upgraded to a Z3 shifter you will have to shave down the sides of the shifter for the DSSR to fit

 

Disclaimer

 

This instructional guide is intended to provide general information only. We recommend a professional automotive technician install any of our products. In no event shall Garagistic be liable for any special, direct, indirect, consequential, incidental injuries or damages whatsoever.