E30 REINFORCED REAR CONTROL ARM EXCHANGE PROGRAM
The stock E30 rear trailing arms live a hard life. Even in stock form, its not uncommon to see the rear sway bar mounting points torn and in rare cases, the shock mounting point broken off. Take this opportunity to restore your rear control arms the right way. Do it once. Do it right.
If you want a bolt up solution then this is it! We sand blast, weld rear sway bar reinforcements, weld in our wing gusset, weld in shock mount brace, powder-coat and then send it back! This is a bolt up way to get reinforced rear control arms. This allows the use of aftermarket sway bars without ripping mounting points out.
PLEASE NOTE: FITMENT OF AFTERMARKET AXLES IS NOT GUARANTEED. OVER-SIZED AXLES WILL NOT WORK WITH THESE TRAILING ARMS
We can modify BMW Z3 rear control arms too but you must supply cores as the wheel bearings may be different then the cores we have. Not spec E30 legal!
HOW LONG DOES THE MODIFICATION TAKE?
NOTE: WE PRESS IN OUR REAR TRAILING ARM BUSHINGS FREE OF CHARGE. If you add the bushings to your cart we can press them into the control arms at no extra cost.