BMW E30 / E36 X-Brace
BMW E30 / E36 X-Brace
BMW E30 / E36 X-Brace
BMW E30 / E36 X-Brace
BMW E30 / E36 X-Brace
BMW E30 / E36 X-Brace
BMW E30 / E36 X-Brace
BMW E30 / E36 X-Brace
BMW E30 / E36 X-Brace
BMW E30 / E36 X-Brace
BMW E30 / E36 X-Brace
BMW E30 / E36 X-Brace
BMW E30 / E36 X-Brace
BMW E30 / E36 X-Brace
BMW E30 / E36 X-Brace
BMW E30 / E36 X-Brace
BMW E30 / E36 X-Brace
BMW E30 / E36 X-Brace
BMW E30 / E36 X-Brace
BMW E30 / E36 X-Brace
BMW E30 / E36 X-Brace
BMW E30 / E36 X-Brace
BMW E30 / E36 X-Brace
BMW E30 / E36 X-Brace
BMW E30 / E36 X-Brace
BMW E30 / E36 X-Brace

BMW E30 / E36 X-Brace

K0707

Regular price $265.00 Save 0%
/


Only 20 items in stock!

THE ULTIMATE X-BRACE FOR THE E30/E36 

We've redesigned our E30 and E36 cross brace for even more added structural rigidity and created an integrated jacking point to make this the best underbody bracing for these chassis. Now made in stainless steel for corrosion resistance and increased strength.

Product Overview

Tighten up your E30/36 chassis with our completely revamped cross brace! This unit will drastically increase the rigidity and reduce flex by connecting the sub-frame to the frame rails. This is an absolute must-have for E30 Cabrio convertible owners to get rid of the creaks. These cross braces are a direct bolt up that will not conflict with aftermarket sway bars or even extremely lowered E30's.  

Fitment

  • All BMW E30 models except for iX
  • BMW E30 318, 320, 325, M3
  • BMW E30 with 24V swaps (M50 / S52 etc)
  • All BMW E36 models
  • BMW E36 318, 325, 328, M3

Assembly Instructions & Install Notes


NOTE - 2 buttonhead bolts will be included with E36 X-Braces and are to be installed on "1B" as shown in the photo below.

 

 

100% compatible with our M60 and M3 swap components.

Includes new hardware!

This is 100% bolt up and is fully reversible. No drilling or permanent modification is needed to properly install. Be forewarned this x-brace does sit slightly lower than the subframe on the E30 chassis, but it sure as heck can take an absolute beating. Don't be too worried if it scrapes occasionally.

Please make sure that your exhaust hangers and motor mounts are in good shape. Old motor mounts tend to lower the motor which could lead to the exhaust touching the cross brace. Healthy motor mounts are a must with this x brace. 

Installation: E30 X-Brace Install

Step 1: Remove the bolts for the front lower control arm bushings


Step 2: Remove the rack and pinion bolts


Step 3: Position the x-brace in place and start 2 bolts, one on each control arm bushing with the new hardware provided


Step 4: Place the spacer between the subframe and the x-brace and install the longer bolt with washer provided


Step 5: Install the remaining hardware. Push the x-brace against the vehicle so it sits flush and tighten the 4 lower control arm bushings


Step 6: Lastly tighten the rack and pinion bolts


Disclaimer

This instructional guide is intended to provide general information only. We recommend a professional automotive technician install any of our products. In no event shall Garagistic be liable for any special, direct, indirect, consequential, incidental injuries or damages whatsoever.