Rear BMW Tie Down Strap Hook (E30, E36, E46)-Steel parts-Yes - Powdercoat Red-Garagistic
Rear BMW Tie Down Strap Hook (E30, E36, E46)-Steel parts-No thanks!-Garagistic
Rear BMW Tie Down Strap Hook (E30, E36, E46)-Steel parts-No thanks!-Garagistic
Rear BMW Tie Down Strap Hook (E30, E36, E46)-Steel parts-Yes - Powdercoat Red-Garagistic
Rear BMW Tie Down Strap Hook (E30, E36, E46)-Steel parts-No thanks!-Garagistic
Rear BMW Tie Down Strap Hook (E30, E36, E46)-Steel parts-No thanks!-Garagistic

Rear BMW Tie Down Strap Hook (E30, E36, E46)

K0112

Regular price $22.00 Sale price $15.40 Save 30%
/


Only 246 items in stock!

REAR TIE DOWN ADAPTERS FOR YOUR E30-E46!

If you tow your car to the track , you need a good way to hold down your E30, E36 or E46 BMW. The lower control arms under the 3 series are not ideal. You may have nice wheels on your car and in the case of an emergency, the tow guys might run a strap right on the lip of your rim, potentially ruining the finish. We have a solution to tie down your E30, E36, or E46. These rear shock tie down adapters make it a snap to locate and secure your vehicle when being transported. Sold in pairs (left and right). Comes in bare steel. Please ask if you are interested in plating No need for install and removal, stays on the car and does not alter performance. This rear BMW tie down strap hook is great as a supplement tie down point as well.

Price is for a pair (2 units). Enough to do 1 car.

WHAT BMW CARS WILL THE REAR SHOCK TIE DOWNS WORK ON?
  • E30
  • E36
  • E46
  • Z3, Z4
Instructions:

garagistic Rear Shock Tie Down

Step1: Safely and securely put the rear of the vehicle on jack stands.

Step2: Support the trailing with you jack so it wont fall when you remove the bottom shock bolt

Step3: Remove the lower shock bolt and lower the trailing arm slowly.

Step 4: With the bigger side of the tie down facing the rear line up the small hole with the bottom of the shock and put the bolt through

Step5: You can muscle up the shock or jack up the shock to line up the bolt with the trailing arm and start threading it. Torque 57ft-lbs.

Disclaimer

This instructional guide is intended to provide general information only. We recommend a professional automotive technician install any of our products. In no event shall Garagistic be liable for any special, direct, indirect, consequential, incidental injuries or damages whatsoever.

Rear Tie Down Install

Installation procedure will be similar for all cars.
1) Safely put the rear of the vehicle on jack stands
2) Place a jack under the rear trailing arm to keep the suspension in place
3) Remove the lower shock bolt
4) Place the rear tie down on the inside of the shock and reinstall the lower shock bolt
5) Torque to 57 ft-lbs

General Shipping Information:

If the shipping address you input is different from your confirmed Paypal mailing address you must email us at info@garagistic.com to let us know that. We ship to your confirmed Paypal mailing address to protect ourselves. We must have an email telling us the shipping address if you do not want it shipped to your confirmed Paypal address. All tracking numbers sent via Paypal. If you have any questions please feel free to contact us at info@garagistic.com


Here at Garagistic, we have over 500 products with more than 700 total variations of those products which are produced in-house here in sunny CA. We pride ourselves in creating products from scratch out of about 75 different types of raw materials ranging from aluminum to Delrin plastic. While we do have stock of raw material, our products take time to for us produce, assemble and pack.



Free Shipping Limitations:

Free shipping is only eligible in the contiguous USA. Free shipping only applies to order that meet certain requirements set by us (and can be changed at anytime). Those requirements are currently that an order is over $450 and under the a "Dimensional package weight" of 30lbs. What this means is that roll bars, sway bars, and items we deem oversized do not ship for free. If your order is over this 30lbs rule it will not qualify for free shipping. Free shipping methods are at our discretion and CANNOT BE CHANGED. Most items will either be first class or priority USPS. Free shipping is not valid internationally and this list (but not limited to): Alaska, American Samoa, Micronesia, Guam, Hawaii, Marshall Islands, Northern, Mariana Islands, Puerto Rico, U.S. Virgin Islands. Customers will not be able to pick shipping methods (or overnight) if free shipping is selected. Qualifying order total is based on product subtotal—taxes and non-standard shipping charges are not included as a qualifying cost. You are responsible for non-standard shipping charges such as special handling surcharges and oversize fees (where indicated), Truck Freight fees, expedited shipping, hazardous materials charges, etc. Offer is subject to adjustment due to returns, cancellations, and exchanges. We have the right at anytime to revoke free shipping.




International Buyers:

Please be aware that we offer two shipping methods overseas. First class and priority flat rate envelope. Although first class is much cheaper, USPS seems to lag on delivery and there is no way to track the package once it has been dropped off.

There is a 20% restocking fee for all returns. For custom parts (made to order parts like our engine mounting kits) there is a 35% restocking fee. We do not accept returned customized items such as driveshafts and wiring harnesses.

The flat rate envelope is more money but you will get your gears much much quicker and the tracking number shows the package route! (the default shipping method on this site is this option).

If you want the cheaper route, you must email us telling us this and we will send you a Paypal invoice. We are not liable if you do not get your package with this option as we have no way to track it once it's at the post office.

You have the option to locally pickup items at our Westminster location (by appointment only):



Pickup Address:

Garagistic LLC

6372 Industry way

Westminster, CA, 92683

Email: info@garagistic.com



Refund Information:

We do not refund shipping costs. On returns on custom parts (or parts returned past 30 days from purchase) we have the right to give store credit instead of a refund. We do not accept returned customized items such as driveshafts and wiring harnesses. By using this website you agree to all these terms.

Please be aware that some parts we offer are made to order and can take up to two weeks before they are shipped. Please contact us before ordering if this is an issue.