BMW CLUTCH STOP - E46: 330 325 328, Z4 M3

Overview

Introducing a clutch stop that is actually designed for your BMW, not one that is thrown together with hardware. By simply replacing your stock clutch stop with this massive 61mm diameter clutch stop, you can adjust the amount of free play in the pedal travel with the 35mm stud. By adjusting this clutch pedal stop up off of the floor you no longer push the pedal further than you need to, allowing for quicker shifts. This is the ultimate clutch stop for your manual transmission BMW. Obviously, not applicable to vehicles equipped with automatic or have SMG transmissions.

Fitment Note: E46 version uses a 35mm bolt! The E30/E36 version comes with a 45mm bolt. Make sure to choose the correct version for your chassis.

Why install a clutch stop?

A clutch stop will provide faster and smoother shifts by reducing and/or eliminating the dead space between your clutch pedal and the floor. This is a must for spirited drivers and track junkies. Installation Difficulty is incredibly SIMPLE. No Tools at all. Anyone can install this clutch stop within a minute or two! Fully adjustable to your personal driving preference.

We recommend always using a little blue Loctite to make sure the bolts don't get loose! This is the version we recommend: https://amzn.to/3MWIUlO

Compatibility

• E46
• E85
• E86
• E89
• Compatible with most BMW models: BMW 318, 318i, 318is, 318ti, 323, 323i, 323ci, 325i, 325ci, 325is, 325ix, 325xi, 328i, 328ci, 328is, 330, 330i, 330ci, 330xi, M3, 3 series, Z4, Z4 M

If you are not satisfied with your purchase, send it back for a money-back guarantee. Not to mention there is a LIFETIME warranty. The E46 330 and E39 5 series will require the thread to be shortened. A few other BMWs may require slight modification. We stand by our products, comes with a lifetime warranty.

Benefits

Benefits of using a clutch stop

• Adds responsiveness
• Streetcar approved
• Faster and smoother shifts
• Lifetime warranty
• Easy install
• 61mm diameter
• Compatible with E46, E90, and E92

Instructions

garagistic Clutch Stop

Step 1: Remove the factory clutch stop, if your car came with it

step 2: Screw in your clutch stop, set it to your preferred setting and tighten the jam nut

Disclaimer

This instructional guide is intended to provide general information only. We recommend a professional automotive technician install any of our products. In no event shall Garagistic be liable for any special, direct, indirect, consequential, incidental injuries or damages whatsoever.