Billet Adjustable End Links - E39, E39 M5 - 31351095664

Description

These are the ultimate adjustable end links for your E39 540i or E39 M5. Designed to handle the abuse of the track while being compliant for the street, we've added some new features to increase durability and enhance user experience.
All end links are quality made in the USA and are Teflon lined to ensure lifetime lubrication and eliminate looseness and chatter caused by age. Both links have LH/RH studded rod ends they allow length adjustments and high angularity for correct proper anti-roll bar static flat. This makes the sway bar parallel to the ground. Comes with everything needed for installation. We highly recommend using blue Loc-tite on all threaded connections.

WILL MY BMW NEED ADJUSTABLE FRONT SWAY BAR LINKS?

When you lower your car, the sway bar geometry changes making the bar no longer as effective because of the angle it's at, adjustable end links will allow you to bring the sway bar angle back to its effective position and get rid of any unnecessary pre-load.

Features

• Hex design of the middle rod allows for easy on-car adjustments
• Greater adjustment range allows you to dial in the perfect geometry of your suspension
• Sealed ball joints on both ends to keep debris out

Adjustment Range

There are two versions available for the F39 540i and E39 M5 models. The first option is our OEM version, specifically designed for vehicles at the stock ride height, providing a direct replacement for the factory end links. In the case of lowered cars, we also provide "Lowered" end links that have been skillfully shortened to accommodate the altered ride height.

To ensure an optimal fit, we strongly recommend measuring the distance between the end link tab on your struts and the ends of your sway bar. This crucial measurement will enable you to determine the most suitable version of end links for your particular setup.

• OEM Height: 10.8" to 14.2"
• Lowered: 8.8" to 12.2"

Compatibility

• E39 540i 1997-2003
  
• E39 M5 2000-2003

Note: Before purchase, we recommend measuring from upper to lower end link mounting tab to ensure proper fitment. End link size can depend on ride height and suspension components

How to Install, Adjust, and Set Pre-Load on your Billet Adjustable End Links

1. Set your car to the desired ride height
2. Position your sway bar to be parallel to the ground
3. Hook up your end links
4. With the end links installed, use the middle hex rod to make fine adjustments

*To get the perfect pre-load, have a friend do this process while you sit in the driver's seat, or use sandbags or other weights to add your weight in the driver's seat while you adjust the end links