BMW E30 M20 80A POLYURETHANE ENGINE BUSHING
These E30 80A polyurethane M20 motor OEM + feel. That means you want a subtle upgrade for your street car without too much of a compromise in comfort. These will hold the engine and transmission with less movement under braking or cornering while transferring minimal noise and vibration through the chassis! These are a bolt through design (10.9-grade hardware). Hardware has a nylon insert so it does not back out on its own. They are a great mount for use for an auto-x application as well! The Garagistic design does not allow for separation of the motor mount at all. This kit is compatible with most M20 powered E30s (will NOT fit the IX): 323, 325e, 325i, and 325IS. Just like every Garagistic bushing, they come with a Garagistic lifetime warranty and are made right here in the USA!
We highly recommend reinforcing your subframe while you are in there. You can add it under the options list for additional savings.
Install Notes/Tips: M20 Poly Motor Mount Torque Spec: 16-18 ft. lbs (18-21 Nm)
- Adds responsiveness
- Streetcar approved
- Does not allow engine movement under heavy braking or acceleration
- Lifetime warranty
- Transmit more power
- Oil/Chemical resistant
- Compatible with most M20 powered E30s (will NOT fit the IX)
COMPATIBILITYThis kit is compatible with most M20 powered E30s (will NOT fit the IX):