Oval Carrier Shifter Bushings (E36, E39, E46, Z3 early)-Shifter Components-Delrin-Garagistic
Oval Carrier Shifter Bushings (E36, E39, E46, Z3 early)-Shifter Components-Aluminum-Garagistic
Oval Carrier Shifter Bushings (E36, E39, E46, Z3 early)-Shifter Components-Delrin-Garagistic
Oval Carrier Shifter Bushings (E36, E39, E46, Z3 early)-Shifter Components-Delrin-Garagistic
Oval Carrier Shifter Bushings (E36, E39, E46, Z3 early)-Shifter Components-Delrin-Garagistic
Oval Carrier Shifter Bushings (E36, E39, E46, Z3 early)-Shifter Components-Delrin-Garagistic
Oval Carrier Shifter Bushings (E36, E39, E46, Z3 early)-Shifter Components-Aluminum-Garagistic
Oval Carrier Shifter Bushings (E36, E39, E46, Z3 early)-Shifter Components-Delrin-Garagistic
Oval Carrier Shifter Bushings (E36, E39, E46, Z3 early)-Shifter Components-Delrin-Garagistic
Oval Carrier Shifter Bushings (E36, E39, E46, Z3 early)-Shifter Components-Delrin-Garagistic

Oval Carrier Shifter Bushings (E36, E39, E46, Z3 early)

K0097-DL

Regular price $27.50 Sale price $16.50 Save 40%
/


Only 639 items in stock!

OVAL CARRIER SHIFTER BUSHINGS (FOR: BMW E36, E39, E46, Z3 EARLY)

Get rid of all that slop in your E36, E46 (or swapped E30) shifter! Our Garagistic delrin and aluminum carrier bushings replace the original rubber bushing (which not only had lots of "give" but is usually neglected and degrades over time). These oval delrin bushings eliminate any side-to-side movement of the aluminum shifter carrier.

These delrin or aluminum shifter bushings fit at the front of the aluminum carrier so NO additional vibration or harshness will be felt. Please note that this is our OVAL version which replaces factory part number 25117507695. Some cares require two sets.

Please check on realoem.com This is for the FRONT carrier bushing, if you need the rear carrier bushing for your car please look HERE.

Please Note: One bushing might fit different the other bushing. Click here to learn why.

WHAT BMW CARS WILL THESE OVAL BUSHINGS WORK ON?
  • E30: Swapped cars (Note: Rear delrin bushings will only work for e30 swapped cars)
  • E34: 535i, M5
  • E36: 328i 328is 328ic M3
  • E46: 328i, 328ci, M3, (330i & 330ci up to 03/03)
  • F22: M235i M240i, 230i

Garagistic Aluminum/Delrin Front Carrier Bushing (ROUND) - K0274

Please Note: One bushing might fit different the other bushing. Click here to learn why.

 

ALUMINUM ROUND CARRIER SHIFTER BUSHINGS (E24, E30, E28, E34)

 

Product Overview

If you're into overkill, you will love our aluminum round shifter carrier bushings. They are basically just like our Garagistic Delrin carrier units except they will NEVER go bad. They replace the original rubber bushing (which not only had lots of "give" but is usually neglected and degrades over time). These eliminate any side-to-side movement of the aluminum shifter carrier.

The front of the carrier does not see a lot of rotational movement so there is no risk in having these seize or anything like that. These are simply the overkill version of our Delrin series. Because the shifter bushings fit at the front of the aluminum carrier NO additional vibration or harshness will be felt. Replaces part number: 25 11 7 519 669 (25117519669).

Please Note: One bushing might fit different the other bushing. Click here to learn why.

 

Step #1

Jack up your car and safely put it on jack stands.

 

Step #2

Remove the notorious B**** clip. This clip is notorious because it can be very difficult to reach with common tools. To remove this clip, you will want to have your transmission supported by the jack in towards the rear of the transmission. Loosen the transmission support brace and carefully lower the jack to lower the transmission a bit in order to gain more space between the transmission and transmission tunnel. From there, you can reach a flat head screw driver to unclip the B**** clip.

An easier way to remove the clip would be to use an 8in radiator hook/pick in order to reach around the transmission from above to unclip the B**** clip.

To see how to remove the B**** clip, check out this video starting at the 07:52 mark - 

Step #3

Unclip your selector rod from your shifter rod. Refer to 8:22 in the video above.

Step #4

Remove the 13mm nut at the rear of the shifter carrier and remove the shifter carrier from the car. Refer to 8:22 in the video above.

Step #5

With the shifter carrier removed from the car, you can now press our the old front shifter carrier bushing. The OEM bushing consists of a rubber bushing with a metal sleeve.

 

Step #6

Now you may press the Garagistic Front Carrier Bushing in. If you find it hard to fit, make sure the hole in the front of the shifter carrier is clear of any burs or debris. If you are still having trouble pressing the bushing in, you can lightly sand the shifter carrier until the bushing can be pressed in.

Step #7 

Installation is the reverse of removal! 

 

If you also bought the rear Delrin bushing. The following are the instructions for

General Shipping Information:

If the shipping address you input is different from your confirmed Paypal mailing address you must email us at info@garagistic.com to let us know that. We ship to your confirmed Paypal mailing address to protect ourselves. We must have an email telling us the shipping address if you do not want it shipped to your confirmed Paypal address. All tracking numbers sent via Paypal. If you have any questions please feel free to contact us at info@garagistic.com


Here at Garagistic, we have over 500 products with more than 700 total variations of those products which are produced in-house here in sunny CA. We pride ourselves in creating products from scratch out of about 75 different types of raw materials ranging from aluminum to Delrin plastic. While we do have stock of raw material, our products take time to for us produce, assemble and pack.



Free Shipping Limitations:

Free shipping is only eligible in the contiguous USA. Free shipping only applies to order that meet certain requirements set by us (and can be changed at anytime). Those requirements are currently that an order is over $450 and under the a "Dimensional package weight" of 30lbs. What this means is that roll bars, sway bars, and items we deem oversized do not ship for free. If your order is over this 30lbs rule it will not qualify for free shipping. Free shipping methods are at our discretion and CANNOT BE CHANGED. Most items will either be first class or priority USPS. Free shipping is not valid internationally and this list (but not limited to): Alaska, American Samoa, Micronesia, Guam, Hawaii, Marshall Islands, Northern, Mariana Islands, Puerto Rico, U.S. Virgin Islands. Customers will not be able to pick shipping methods (or overnight) if free shipping is selected. Qualifying order total is based on product subtotal—taxes and non-standard shipping charges are not included as a qualifying cost. You are responsible for non-standard shipping charges such as special handling surcharges and oversize fees (where indicated), Truck Freight fees, expedited shipping, hazardous materials charges, etc. Offer is subject to adjustment due to returns, cancellations, and exchanges. We have the right at anytime to revoke free shipping.




International Buyers:

Please be aware that we offer two shipping methods overseas. First class and priority flat rate envelope. Although first class is much cheaper, USPS seems to lag on delivery and there is no way to track the package once it has been dropped off.

There is a 20% restocking fee for all returns. For custom parts (made to order parts like our engine mounting kits) there is a 35% restocking fee. We do not accept returned customized items such as driveshafts and wiring harnesses.

The flat rate envelope is more money but you will get your gears much much quicker and the tracking number shows the package route! (the default shipping method on this site is this option).

If you want the cheaper route, you must email us telling us this and we will send you a Paypal invoice. We are not liable if you do not get your package with this option as we have no way to track it once it's at the post office.

You have the option to locally pickup items at our Westminster location (by appointment only):



Pickup Address:

Garagistic LLC

6372 Industry way

Westminster, CA, 92683

Email: info@garagistic.com



Refund Information:

We do not refund shipping costs. On returns on custom parts (or parts returned past 30 days from purchase) we have the right to give store credit instead of a refund. We do not accept returned customized items such as driveshafts and wiring harnesses. By using this website you agree to all these terms.

Please be aware that some parts we offer are made to order and can take up to two weeks before they are shipped. Please contact us before ordering if this is an issue.