Free standard shipping on orders over $450 on Garagistic Manufactured Products Only - Restrictions may apply
If you have a Garagistic shift knob and you want to install it on a factory BMW shifter, you'll need one of these adapters to install. This adapter is included in all shift knobs purchased from us. If yours is broken or lost, you can get a replacement here.
Please note: Each purchase of a shift knob included a threaded adapter!
The threaded adapter allows you to run a Garagistic threaded shift knob onto an OEM style shifter handle which clicks in place with a slot.
Installation of the adapter is as simple as lining up the slot on your shifter with the inside of the shifter adapter then pressing it on. It will require a bit of force but the adapter will click in place once fully seated.
Removal of the threaded adapter requires that you turn the Garagistic shift knob several times to expose about 4 or 5 threads of the adapter.
Once the Garagistic shift knob has been threaded off this much, the shift knob (with the threaded adapter) will pull right off.
It is very important the threaded shift knob is threaded off a little before pulling off of the rod. The last few threads are what tighten the shift knob + adapter down on the rod.