


Mercedes Benz 16V Cosworth190E W201.034 14lb Lightweight Flywheel
Looking to upgrade your 190e flywheel? How about a lightweight version to get those revs up a bit faster? Here you go! We now offer a 14lb lightweight flywheel designed for the W201.034 chassis. Made by Flieben_ca, these flywheels are designed with racing in mind. Please read the details listed below before purchasing!
Flywheel Details
-Mercedes M103/M104 Light Weight Flywheel for Manual Conversion.-Condition: New.
-This flywheel is used for converting an m103 or m104 engines with an automatic to a manual 5-speed transmission.
-This flywheel is designed for those doing a dog leg Getrag 5 speed swap. This will also work with other 5 speed manual transmissions that are made for a single mass flywheel (Long input shaft)
-The actual flywheel does not include the ring gear. The automatic ring gear (flexplate) will need to be reused and bolted onto the button style flywheel.
-All mounting hardware is included.
Installation Note (Very Important):
Please make sure to install the crack position sensor with its oem washer. The CPS washer acts as a spacer and is needed to achieve the correct CPS position. Failing to install the crank position sensor washer, will cause the flywheel to eat away and destroy the CPS!- 7lb button style flywheel
- Torque plate
- Crank bolts
- Pressure plate bolts
- Flex plate bolt and washers.
Suggested clutch
Use a 228mm clutch off a w201 2.6 or 2.3-16.