Mercedes Competition Wheel Stud Conversion Kit: (5-Lug)
Do you change your wheels often? Whether it's at the track, in the garage, or at the show, wheel studs make wheel installation a breeze by self-aligning the wheel to the hub, which means no more sitting on the ground with your wheels in your lap. These 12x1.5 90mm studs have a tapered bullet nose design which makes lug nut installation much less challenging!
Losing a wheel due to improperly installed wheels is no fun at all. If you have ever experienced this first hand you likely already understand the importance of being able to properly line-up and install a wheel every time without failure.
These 12x1.5 90mm wheel studs are compatible with spacers up to 25mm thick, allowing for use with a majority of wheel and spacer combinations!
Important Note: To receive all parts needed for installation, you will NEED to purchase the optional lug nuts. A vast majority of stock Mercedes come with lug bolts, which means to fully install these you will need BOTH wheel studs and lug nuts!
- Spacer Compatibility: Up to 25mm Spacers
- Bullet Nose Hex Studs - Allowing for a Quick and Pain-Free Wheel Install!
- Rust Proof Black Zinc Coating on Both Studs & Nuts
- 20 Studs Per Kit w/ Optional Lug Nuts
- Optional Lug Nuts: Open-Ended Conical Nuts
- All 5-Lug Mercedes Bens with 12x1.5mm thread pitch wheel bolts (W107, W116, W201, W203, etc.)
- Torque Sequence: 1, 3, 5, 2, 4
- Torque Spec: 75 to 85 lb-ft.
- Required Engagement: 7 Turns Minimum